Sustainable Basic Hoodie Stanley/Stella

Submission specifications for Stanley/Stella's Sider Hoodie

Frequently Asked Questions for Stanley/Stella's Sider Hoodie

What are the specifications of this product?

• • Brushed flannel
    
  • 85% Spun and combed organic cotton, 15% Recycled polyester
    
  • 300 GSM
    
  • Raglan sleeves
    
  • Hood lined with main fabric
    
  • Round, tone-on-tone drawstring with metal ends
    
  • Metal eyelets
    
  • Reinforcement tape with fishbone pattern in the neck
    
  • Half-moon panel in the neckline, made from the main fabric
    
  • Slanted side seams with pockets
    
  • 1x1 ribbing at the cuffs and bottom of the body
    
  • Flatlock stitching at all seams
    
  • Unisex

What is this product exactly? And what can I use it for?

• Stanley/Stella's Sider Hoodie are clothing made from textile material and are the best way to stand out. You can print your Stanley/Stella's Sider Hoodie with the coolest designs. The Stanley/Stella's Sider Hoodie can be used as promotional items, as working clothes or as teamwear.

Which production techniques do you use?

• For the production of your Stanley/Stella's Sider Hoodie we use the following production technique(s):
• Digital (also called Direct-to-Garment or DTG) - with this technique, the ink is printed directly onto the product. It makes it possible to switch easily to another print per product. However, it takes quite a long time to print a product. For a limited amount (up to 50 pieces) DTG is the best technique to use. With DTG it is only possible to print full colour.
• Screen printing. This technique is useful for large quantities of prints. Screen printing is relatively expensive to start, but the time and cost to print a shirt are much lower than with DTG.
• Screen printing: in this technique, products are tensioned and then placed under a screen. A layer of ink will be lowered on top of the screen. The ink only adheres to the part of the screen that is permeable (your imprint).

How do I have to supply my artwork?

• It is possible to supply your design files in multiple ways. The best way, for the best result, is to supply your files in Vector. If the logo consists of pantone colours, it should be saved as vector. Vector means that the design isnt made of pixels, but out of lines.

What are the washing instructions?

• • Wool washing program
    
  • Wash inside out
    
  • Screen printing/ embroidery: Maximum 40ºc
    
  • Full color: Maximum 30ºc
    
  • No liquid laundry detergent
    
  • Do not wash chemically
    
  • Do not bleach
    
  • Not in the tumble dryer / dryer
    
  • Never iron the print

How long will the print last?

• With silk-screen printing and embroidering, the decoration will last at least 20 washes. After 20 washes the print may begin to fade in colour. In the case of a full colour, the printing will last at least 10 washes and the print can become less fierce after the first wash (2-10% less), especially with light fabrics. The above is only applicable if you strictly adhere to the washing instructions for the different types of printing.

Can the print positions deviate from the print?

• Printing Stanley/Stella's Sider Hoodie is different from printing paper, not a single Stanley/Stella's Sider Hoodie is the same. It can be that there is a small deviation in the position of the print. This is minimal and often not visible when the Stanley/Stella's Sider Hoodie are worn.